Back to Blog
How-to Guides 2026-11-17 MIG/TIG/Stick Welders & Plasma Cutters | USA Weld – HTP ... 0 views

25 Series Flexible Swan Neck: Fit and Replacement Steps

25 Series Flexible Swan Neck: Fit and Replacement Steps

Replace the flexible swan neck on your 25 Series MIG gun with confidence. Learn what fits, which parts you may need, and how to order the right components.

When a flexible swan neck makes sense on a 25 Series gun

A flexible swan neck lets you adjust the torch angle to reach awkward joints without repositioning the whole gun. If your current 25 Series neck is damaged, loose, or simply doesn’t hold its shape, replacing it restores control and weld quality.

The 25 Series Flexible Swan Neck (product ID 1278964) is a direct replacement for the 25 Series flex neck. Before you order, confirm you have a 25 Series gun—this neck is not listed for other series.

What the catalog confirms about the 25 Series flex neck

  • 25 Series Flexible Swan Neck: 25 Series flexible swan neck. This is the core replacement part for your 25 Series MIG gun.
    25 Series Flexible Swan Neck
    25 Series Flexible Swan Neck
  • 25 Series Flexible Swan Neck: When replacing the 25 series flex neck you might also need a new tip holder/diffuser part# 25502-thdif—this part is sold separately. Inspect your existing tip holder/diffuser; if it’s worn or damaged, order it together to avoid a second wait.
  • 25 Series Flexible Swan Neck: If you also need new nozzles please see part# 25505-3 and replacement contact tips are 24 series. These part numbers ensure you get compatible consumables for your 25 Series gun.

How to replace the swan neck on a 25 Series MIG gun

The catalog does not provide step-by-step instructions, so follow your gun’s manual or consult a qualified technician. The general sequence below reflects common practice for MIG gun neck replacement; adapt it to your specific equipment.

  1. 1. Power down and disconnect: Turn off the welder, unplug it from power, and shut off shielding gas. Let the gun cool completely before handling.
  2. 2. Remove the nozzle and contact tip: Unscrew the nozzle and contact tip to expose the tip holder/diffuser. Inspect these parts for wear; replace if needed (nozzle 25505-3, contact tips 24 series).
  3. 3. Detach the old swan neck: Loosen the connection at the gun body—typically a threaded collar or set screw. Support the gun to avoid stress on the cable.
  4. 4. Install the new flexible swan neck: Thread the new neck onto the gun body and tighten securely. Do not over-tighten; follow any torque guidance in your manual.
  5. 5. Reassemble and check alignment: Reinstall the tip holder/diffuser, contact tip, and nozzle. Adjust the flexible neck to your desired angle and verify the wire feeds smoothly without binding.

Checkpoints before you order

Confirm your gun is a 25 Series model. Check the tip holder/diffuser (part# 25502-thdif) and replace it if the threads are worn or the diffuser is clogged. Also verify your contact tip series—25 Series guns use 24 series contact tips—and nozzle part# 25505-3 if yours is damaged.

If you’re unsure which parts you need, call USA Weld at 847-357-0700. The catalog explicitly invites you to call with questions, so use that resource to avoid ordering the wrong components.

What the catalog does not tell you

The supplied information does not include torque specifications, thread sealant requirements, or a step-by-step procedure. It also does not confirm compatibility with other series or aftermarket guns. For those details, refer to your owner’s manual or contact the manufacturer.

Always follow the safety instructions in your welder’s manual. This guide is not a substitute for professional training or manufacturer guidance.

Related Articles

Customer Service
Home
Products
Cart
Profile