35 Dinse Ground Cable and Clamp Assembly: What's in the Kit?
By MIG/TIG/Stick Welders & Plasma Cutters | USA Weld – HTP ... | Published: 2026-11-05
Category: أدلة الشراء
A 35 Dinse ground cable assembly pairs a 1/2-inch connector with a 400-amp clamp. Compare AWG #4 vs #2 cable and 10-foot vs 25-foot lengths before you buy.
Quick answer
Choose the AWG #2 35 Dinse ground cable assembly when you need a longer 25-foot lead or want heavier cable for more demanding work; choose the AWG #4 10-foot assembly when a shorter, lighter lead fits your HTP welder and budget.
Cable gauge and length change the job, not the connector
Both assemblies use the same 1/2-inch (12.8 mm) Dinse connector and a 400-amp clamp that opens to 3 inches, so the connection point and clamping capacity are identical. The real differences are cable gauge (AWG #4 vs AWG #2) and available length (10 feet only vs 10 or 25 feet).
A heavier cable gauge generally suits longer runs or more demanding current, while a lighter gauge keeps the lead easier to move around a small shop. Longer cable adds reach but also more cable to manage and store, so match length to how far your work clamp typically sits from the machine.
Machine compatibility narrows the choice
The AWG #4 assembly is listed for the HTP MTS 210, MIG 200i, Pro Pulse 220 MTS, Pro Pulse 200, MIG 2400, and Invertig 221. The AWG #2 assembly is listed for the Pro Pulse 200/220 MTS and MIG 2400 only.
If you own an MTS 210, MIG 200i, or Invertig 221, the AWG #4 assembly is the only one of these two listed for your machine. If you own a Pro Pulse 200/220 MTS or MIG 2400, both fit, so the decision comes down to gauge and length.
Decision rules for choosing a 35 Dinse ground cable assembly
- Check your machine first: If you own an MTS 210, MIG 200i, or Invertig 221, choose the AWG #4 10-foot assembly. If you own a Pro Pulse 200/220 MTS or MIG 2400, either assembly fits.
- Match length to reach: Pick 10 feet when your work clamp stays close to the machine; pick 25 feet only if you need the extra reach and own a machine listed for the AWG #2 assembly.
- Choose gauge for the workload: Choose AWG #2 when you want heavier cable for longer runs or more demanding current; choose AWG #4 when a lighter lead is easier to handle in a compact shop. Confirm the 1/2-inch Dinse connector on your machine before ordering.
Product facts
- Complete 35 Dinse Ground Cable and Clamp Assembly: Made from AWG #4 cable and available only in 10-foot length. A lighter, shorter lead that fits the listed HTP machines and keeps the run compact.
Complete 35 Dinse Ground Cable and Clamp Assembly - 35 Dinse Ground Cable & Clamp Assembly: Made from AWG #2 cable and available in 10-foot and 25-foot lengths. Heavier cable and a longer option give more reach and capacity for Pro Pulse 200/220 MTS and MIG 2400 owners.
35 Dinse Ground Cable & Clamp Assembly
Who should buy which assembly
Best for
- Owners of HTP MTS 210, MIG 200i, or Invertig 221 who need a replacement 10-foot ground lead
- Pro Pulse 200/220 MTS or MIG 2400 owners who want heavier AWG #2 cable or a 25-foot run
Not for
- Machines that do not use a 1/2-inch (12.8 mm) Dinse connector
- Welders needing a cable length other than 10 or 25 feet
