Wire Feed Motor for the Clarke® MIG 180EN
Category: 04600145
12v wire feed motor for Clarke® MIG 180EN welders. The wire feed motor measures 37 mm (1-29/64") in diameter and 63 mm (1-1/2") in length. The diameter of the pinion measures 8.7 mm (11/32"). Two screws hold the motor in and are set about 23 mm apart.
PLEASE NOTE: We do not accept returns on electrical parts. If your current wire feed motor does not run, the issue may be the motor or the circuit board. To test the motor, power the motor with a 12v (at least) power source such as a car battery or a battery charger. If the motor does not turn when connected to a 12v power source, then you need to replace the wire feed motor; if the motor does turn when connected to a 12v power source, then you may need to repair or replace the circuit board.
Before you pay
Check the method and total at checkout.
When it ships
Allow for processing time as well as the journey to you.
Standard Shipping: Handling (business days) 0–1; Transit (business days) 7–15.
Express Shipping: Handling (business days) 0–1; Transit (business days) 7–15.
View policyIf you need a refund
Keep your order number and contact the store to start.
Please contact us for the refund processing timeframe before returning an item.
View policyDelivery costs
Review the cost for your destination and chosen service.
Standard Shipping · United States: $0.00
Express Shipping · United States: $3.99
View policyReturning an item
Check the return conditions before sending anything back.
United States · Return window (days after delivery): 30. Return method: By mail. Return postage: Seller pays.
View policy