20 Series (250A) Water-Cooled Torch w/35 Dinse Power Connection, 5/8"-18 LH Water Connections, & 5/8"-18 RH Gas Fitting

20 Series (250A) water-cooled TIG welding torch with a 35 Dinse (1/2" OD) adapter for power/current supply, 5/8"-18 LH water-in and water-out fittings, and a 5/8"-18 RH gas fitting. Our water-cooled TIG welding torch also includes a zippered Nylon outer cable cover, our tool-less connection torch head, and super-flexible, color-coded cables. The torch features a rated duty-cycle of 100% at 250 amps.

Available with a standard rigid neck, a flex neck, or a swivel head and in 12.5' or 25' lengths. Includes a long back cap and a heat shield. Collets, collet bodies, alumina cups, and tungsten sold separately.

Please note that the tig torch comes as shown with just the heat shield an it, no additional consumables are included. 

For consumables, please visit the following links:

20 Series Water-Cooled Alumina Standard Consumables
20 Series Water-Cooled Gas Lens Consumables
20 Series Water-Cooled Pyrex Large Diameter Consumables
20 Series Water-Cooled Pyrex Standard Consumables 

Note regarding swivel head TIG torches: If you do not tighten your swivel head torch head enough, the loose connection can cause overheating and arcing. Arc damage and melting at the brass surfaces underneath the adjustment stem and swivel head, as well as those on the torch body, can occur. If those surfaces are compromised, the body, head, and adjustment stem will all need replacement. 

Recommended tightening procedure:

1. Position the torch head 90º counter-clockwise from the desired position.
2. Tighten the adjustment stem by hand until snug.
3. Turn the torch head* 90º clockwise until firmly tight.
*Do not use the adjustment stem for the final tightening of the torch head to the torch body, only use the torch head to do so.