15 Series 150A MIG Gun Compatibility for Popular Welders
By MIG/TIG/Stick Welders & Plasma Cutters | USA Weld – HTP ... | Published: 2026-10-26
Category: Buying Guides
Find out if the 15 Series 150A MIG gun fits your ATD, Blue Point, Daytona, Marquette, NAPA, Pro Spot, or Snap-On welder. Includes compatibility check and decision rules.
Quick answer
The 15 Series 150A MIG gun is compatible with specific models from ATD, Blue Point, Daytona, Marquette, NAPA, Pro Spot, and Snap-On. Use the model list below to verify your welder before purchasing.
Why compatibility matters
A MIG gun that doesn't match your welder's connection or amperage rating can cause poor performance or safety issues. The 15 Series 150A gun uses HTP America 15 Series consumables and is designed for welders in the 130-150 amp range. Always confirm your welder model against the supported list.
Trade-offs and limitations
This gun is not universal. It only fits the listed models from seven brands. If your welder is not on the list, you'll need a different gun or an adapter. The 150A rating means it's suitable for light to medium home and shop use, not heavy industrial welding.
Decision rules
- Check your welder model: Locate the model number on your welder's nameplate. Compare it to the list: ATD 37155, Blue Point MB-135, Daytona FAB 155, Marquette M12184/M12190/M12208, NAPA 83-318/83-327/83-360/83-390, Pro Spot PR-155 Model 2, Snap-On MIG 115/MIG 125/MIG 135. Write down your model number before ordering.
- Verify amperage rating: The gun is rated for 150A at 60% duty cycle. If your welder exceeds 150A, this gun may overheat. For welders under 130A, it will work but may be heavier than needed. Match the gun's rating to your welder's typical output.
- Consider cable length: The 10' cable is standard for most garage and shop setups. If you need more reach, look for a longer cable option or use an extension. Measure your workspace distance from the welder.
Product facts
- 10' 15 Series (150A) MIG Gun f/Select ATD®, Blue Point®, Daytona®, Marquette®, NAPA®, Pro Spot®, & Snap-On® Welders: 10' 15 Series (150A) MIG gun with HTP America 15 Series consumables. Equivalent to Marquette OEM P/N 247008. You can use standard 15 Series consumables for easy replacement and consistent weld quality.
10' 15 Series (150A) MIG Gun f/Select ATD®, Blue Point®, Daytona®, Marquette®, NAPA®, Pro Spot®, & Snap-On® Welders - 10' 15 Series (150A) MIG Gun f/Select ATD®, Blue Point®, Daytona®, Marquette®, NAPA®, Pro Spot®, & Snap-On® Welders: Fits ATD 37155, Blue Point MB-135, Daytona FAB 155, Marquette M12184/M12190/M12208, NAPA 83-318/83-327/83-360/83-390, Pro Spot PR-155 Model 2, and Snap-On MIG 115/MIG 125/MIG 135. This list covers many common home and shop welders, but you must verify your exact model number.
Who should buy this gun
Best for
- Owners of ATD 37155, Blue Point MB-135, Daytona FAB 155, Marquette M12184/M12190/M12208, NAPA 83-318/83-327/83-360/83-390, Pro Spot PR-155 Model 2, or Snap-On MIG 115/MIG 125/MIG 135 welders
- Light to medium welding tasks (up to 150A) in home or small shop
Not for
- Welders not listed in the compatibility list
- Heavy industrial welding above 150A
- Users needing a longer cable than 10' without an extension
